How to Change Code on Schlage Lock? Full Steps Here

How to Change Code on Schlage Lock – Schlage is the foremost manufacturer of residential entrance door keyless entry systems.

As long as you know the Schlage keypad programming code, you can simply have up to 19 separate users coded to run the lock and can uninstall an operator at any time.

Now, to activate or disable the lock’s vacation mode, or to make other programming alterations, such as turning the lock’s beeper on or off or activating the switch lock, you need to have the programming code. You can simply enable or disable any one of these codes whensoever you want.

How to Change Code on Schlage Lock?

The keyless entry devices of Schlage’s younger generation substitute mechanical push buttons with touchscreen buttons and Schlage keyless lock sets use blue-tooth and wireless answers in the new models that permit you to program and control the lock using a smartphone, or with Amazon Alexa or an alike device through voice activation.

You can also be able to store as many as 33 separate individual user codes on these electronic versions. If you want to know more about changing the 4 Digit Code on A Schlage Lock then read this article carefully.

Also Check:

What are the Types of Buttons code?

There are 10-digit buttons on the outer face of the keyboard, and a “Schlage” option located at the top of the keyboard.

Now, both the six-digit programming code and the four-digit user codes can be entered using the number keys.

Now, to simply program your Schlage keypad, you have to first understand the two types of codes: the six-digit programming code and the four-digit user code.

Programming Code: 6-Digits

There is a programming code of six digits that are used to permit the lock-programming set’s features. The initial step in programming individual four-digit user codes would be to enter this code. This security preset comes with your lock, but you can also change it to a code of your choice as well.

User Codes: 4-Digits

Four-digit user codes still exist. They are the routine codes that in steady service would act as the “keys” to unlock your door. The default user codes can also be initiated on the back of the keypad or in the User Manual.

Up to 19 4-digit user codes, which include a primary entrance code and visitor codes, can be stored! This code must change from the first four digits of the given programming code.

How can you change 4 Digit code on a Schlagle Lock FE575, FE595, and fe695?

Step 1: Find your 6-digit programming code

You need to locate and write down the six-digit programming code for your Schlage keyless entry. This is the initial code you will input, and it will activate the lockset, permitting you to perform all of the programs. The original programming code can be found on the yellow label on the installation commands for your keyless lockset or on the backside of the deadbolt lock.

Step 2: Enter your 6-digit programming code

Next, you simply need to enter your six-digit programming code on the keypad and Wait for the “Schlage” button to flash amber or orange and beep three times. The “Schlage” button will remain illuminated to specify that the lock is ready for reprogramming.

Step 3: Press the Schlage and number 1 buttons at the same time.

Simply press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code.
You need to wait for the “Schlage” option to beep and flash three times.

Step 4: Enter your new entry code

On the keypad assembly, you need to enter your new user code. This must be a one-of-a-kind code that is not currently in use as a primary or guest entry code. It also cannot be your programming code’s early four digits.

Step 5: Enter your new 4-digit entry code again

You also need to Re-enter the same four-digit code to confirm the change.
Then, the “Schlage” button flashes green and a long beep to indicate successful reprogramming.

How can you Add 4 Digit User Code to a Schlage Lock?

Schlage keypad locks may save up to 19 different user codes, which you can share with friends, family, or neighbors. Guest codes are useful since they allow you to generate temporary codes that can be easily erased afterward.

To add more 4-digit user codes, follow the procedures below!

First, You simply have to enter your 6-digit programming code on the keypad and the Schlage button will blink orange three times and then beep 3 times.

Then, you need to press the Schlage button and then press the number 1 on the keypad assembly. The Schlage button will blink orange three times, followed by 3 lock beeps.

After that, you need to enter your desired four-digit entry code on the keypad.

This must be a unique code that is not presently being used as a primary entry code or guest code. It also cannot be the first four digits of your programming code.

Step 4: Confirm your 4-digit code

You need to confirm your new code by entering it again once more. If the whole thing is done properly, the Schlage button will flash green, trailed by one long beep to verify your new code. You also need to test the code to ensure everything works.

How can you remove the 4-digit code on a Schlage Lock?

First, you need to enter the programming code supplied with the system. It was printed, along with the default user codes a six-digit code, on a yellow label on the back of the lock.
Then, you simply have to press the “Schlage” button and the number “2” button instantaneously to eliminate a previous entry code – the “Schlage” button will flash and beep three times.
After that, you need to enter the four-digit entry code you want to remove— the “Schlage” button will flash and beep three times.
Now, simply Re-enter the same four-digit entry code for validation.
The “Schlage” button will beep one long beep and flash green, representing a successful deletion of your earlier entry code.

Conclusion:

We have shared everything about changing the 4 Digit Code on A Schlage Lock in this article on “How to Change Code on Schlage Lock” for you if the info that we shared above helped you in any way then do share it with others.