How to Reset Schlage Keypad Lock without Programming Code?

How to Reset Schlage Keypad Lock without Programming CodeIf you’re observing for tips to support you in resetting your Schlage Keypad Lock without code, you’re on the right page.

This column clarifies everything you want to know about resetting a Schlage Keypad Lock without code.

Unnecessary to say, we will walk you through the steps to reset your Schlage keypad lock in seconds.

How to Reset Schlage Keypad Lock without Programming Code?

How to Reset Schlage Keypad Lock without Programming Code

If you want to know more about My Schlage Keypad Lock then read this article carefully.

How to Reset Schlage Keypad Lock without Programming Code?

You don’t really require any code to reset a Schlage Keypad Lock. You simply need to follow the steps below to reset your Schlage Keypad Lock (without code):

  • You simply need to slide the battery cover up to remove it and then disconnect the battery.
  • Then, you need to press and release the outside Schlage button.
  • Now, you need to reconnect the battery. Next, simply press and hold the Schlage button until the light turns green and the lock beeps. You also need to make sure you complete this step in 10 seconds.
  • Now, to confirm whether the reset is positive, enter one of the default 4-digit codes (User Code) to see if the bolt moves. If it does, then the reset was effective.

That’s all you need to do is simply reset your Schlage Keypad Lock. As you will see, you don’t need to enter any code. You need to note that this reset method might not work for Schlage Connect and Schlage Encode. If you’ve any of those, try this reset process:

  • You need to slide the battery cover up to remove it. Next, disconnect the batteries.
  • Then, you need to press and hold the outside Schlage button and while holding the Schlage button, reconnect the batteries and release the button afterward. This will simply reset the lock.
  • Now, to simply confirm if the reset is effective, you need to press the outside Schlage button, then enter one of the preset User Codes (4-digit code). If the bolt moves afterward, it means the reset was effective.

What Follows After Restoring Factory Default Settings on Your Schlage Keypad Lock?

As you maybe know, carrying out a factory reset will delete all your previous programming.

So, you’ll need to simply start all over again to program the lock. Here are some important programming functions to start with:

Change the 6 Digits Default Programming Code

Schlage keypad locks typically come with a 6-digit default Programming Code. Maybe you altered the code formerly, but resetting the lock will restore the default Programming Code, so you’ll need to change this code for security reasons.

The code is typically printed on a white sticker—situated on the user manual and the back of the keypad assembly (needs removing the lock from the door). 

If you’re not certain how you can change the 6-digit default Programming Code, here is how:

  1. First, you need to enter the default Programming Code (6 digits) and wait for the Schlage button to light three orange lights, trailed by three beeps. Next, you need to press the Schlage button.
  2. Simply Press key 3 on the keypad and wait for the Schlage button to light three orange lights, trailed by three beeps.
  3. Then, you need to Enter a new Programming Code (6 digits), then wait for the Schlage button to light orange three times, followed by three beeps.
  4. After that, Re-enter the new Programming Code to finish the operation. The Schlage button will illuminate green, tailed by one long beep, indicating that the Programming Code has been effectively changed.

Delete the Default User Codes

Like the Programming Code, Schlage Keypad Locks come with two default User Codes (for unlocking the lock via the keypad).

The two codes can be found on the front of the user manual and the back of the keypad assembly (along with the Programming Code).

And you’ll need to remove these codes and add your unique codes. Follow the instructions below to delete the two default User Codes at once:

  1. On the keypad, you need to enter your current Programming Code and wait for the Schlage button to flash an orange light three times, trailed by three beeps. Next, you simply need to press the Schlage button.
  2. After that, simply Press key 6 on the keypad and wait for the Schlage button to light orange three times, trailed by three beeps, and enter your Programming Code. This will remove the two default 4-digit User Codes.

Do You Need The Programming Code?

If you’re thinking, “What’s a programming code and why does it sound like a password I’ve forgotten?” — you’re not alone! Some Schlage locks are like high-maintenance friends.

They need specific codes for a proper reset. Others? Not so much. But either way, you’ll need access to both sides of the door.

No, this isn’t some weird door-hugging ritual. It’s the techy stuff you need to do.

How To Find The Programming Code?

Alright, detective! To reset certain Schlage locks, you’re on the hunt for two things: default codes and the elusive programming code.

If your lock has a key slot, disable it temporarily and get ready for some light disassembling. Once off, peek at the bottom of the exterior mechanism.

There should be a yellow sticker holding the precious codes. Can’t find it? Don’t despair, the sticker could also be hiding under the battery cover or inside the mechanism. Sneaky, sneaky.

How To Factory Reset The Schlage Smart Wi-Fi Deadbolt?

  • Schlage Smart Wi-Fi Deadbolt:

Think of it as changing its battery but with some added flair! Remove the battery cover, find the reset button, and press and hold it till the LED stops flashing red. Voilà, a reset lock.

  • Sense Smart Deadbolt:

This one’s a bit trickier. Remove the top half cover, disconnect the battery, press the Schlage button, and reconnect. Once done, try a default code.

  • Schlage Connect Smart Deadbolt:

Almost the same as the previous one. But here, after reconnecting the battery, wait for the logo to flash three times. Then, test with a default code.

  • Schlage Touch Keyless Touchscreen:

Disconnect the battery, press the Schlage button, reconnect, and wait for a beep. Test with a default code and hope for the best.

  • Other Schlage Locks:

For models like BE365 Deadlock, FE575 Auto Lock, etc., remove the battery cover, disconnect the battery, and press the Schlage button. Once reconnected, the button should light up, and then you can test with a default code.

How To Factory Reset The Schlage Touch Keyless Touchscreen?

So, you have the Schlage Touch Keyless Touchscreen, and you’re itching for a reset? No sweat! And while the Schlage site seems to be playing hide and seek with its diagrams, don’t fret; we’ve got a simple guide for you. For those seeking deep-dive details, fetch the Touch Keyless Touchscreen manual, particularly for FE695 and BE375 models.

  1. Start by unplugging the battery connector. It’s like unplugging your router when the Wi-Fi’s acting up.
  2. Spot the Schlage button, typically flaunting itself on the door’s exterior.
  3. Reattach those batteries. As you do, give the Schlage button a long, heartfelt press within ten seconds. Expect a brief light show of about a second.
  4. Keep pressing until the button turns a reassuring green and serenades you with a beep. Almost like it’s saying, “I’m back!”
  5. Fancy a test drive? Use a default code to unlock. If you’re drawing a blank on the code, scroll up; we covered that bit earlier.
  6. Frustration alert: If it’s a no-go, rinse and repeat.

How To Factory Reset Other Schlage Locks?

Got a different lock? Perhaps a BE365 Deadlock, or maybe the snazzy-sounding FE599NX Z-Wave Enabled Flex Lock? Whatever your pick, here’s a general reset recipe that should do the trick:

  1. Take off that battery cover, found snugly on the lock’s inside. A slide usually does it, but for the stubborn ones, arm yourself with a screwdriver.
  2. Detach the battery connector – just ensuring no lingering power vibes.
  3. Punch that Schlage button; let it know who’s boss.
  4. Within a rapid ten seconds, reunite the battery, and enjoy a brief one-second light from the Schlage button.
  5. Following the light cameo, play a mini tug-of-war with the Schlage button until it glows green and sends a beep your way.
  6. It’s quiz time! Use a default code and see if the lock opens its heart (or door) to you. Need a refresher on codes? Peek above!
  7. If the lock remains cold and unresponsive, well, persistence is key. Go at it again.

Can You Reset A Schlage Keypad Lock Without Any Codes?

So, rumor has it that many Schlage keypad locks have a superhero power – they can reset without codes. But here’s the plot twist – without the codes, you’re basically resetting in the dark. You won’t know if it actually worked.

After the reset drama, if you plan to add new members to your “lock club,” you’ll need that elusive programming code.

And though it’s a bit of a detective’s job to dismantle your lock to find these codes, think of it as a rite of passage for utmost safety.

Still thirsty for more insights? Dive into the ocean of knowledge that is the Schlage YouTube channel.

And remember, when in doubt, there’s always a video tutorial somewhere waiting for you!

FAQs on How to Reset Schlage Keypad Lock without Programming Code:

This might be occurring because you’re not following the steps properly. Simply follow the reset method in this post to factory reset your Schlage BE365 in seconds and make sure you complete the last step within 10 seconds, or else the lock might exit programming mode, leading to ineffective attempts.

  • Why I can’t remember my Schlage Programming Code; what to do?

You can simply perform a factory reset on your lock and then use the default Programming Code to reprogram the lock. You can simply see more details on troubleshooting lost/forgotten Schlage Programming Code.

  • Where is the 6 digits Code on a Schlage Lock?

The 6-digit code (Programming Code) is typically situated on the front of the lock’s user manual and the back of the keypad assembly. You’ll need to eliminate the lock from the door to find the code on the back of the keypad meeting.

  • How can you change my Schlage 6-digit code?

If you wish to change your Schlage 6-digit code, first you need to put the lock in programming mode by entering the 6-digit code and pressing the Schlage button. Next, you need to press 3, then simply enter a new programming code (6 digits) twice. The lock will flash green and beep once, and that states the operation is successful.

Also Check:


We have shared everything about My Schlage Keypad Lock in this article on “How to Reset Schlage Keypad Lock without Programming Code” If the info that we shared above helped you in any way then do share it with others.