Arlo Camera Blinking Orange – Fix

Are you an Arlo camera user who has encountered the frustrating blinking orange light?

You’re not alone. Many Arlo users have faced this common issue, which can be caused by various factors such as depleted batteries, internet connectivity problems, improper connections, or sync errors.

Arlo Camera Blinking Orange – Fix

Arlo Camera Blinking Orange

In this article, we’ll provide you with a detailed, step-by-step guide to help you troubleshoot and fix the Arlo camera blinking orange problem.

Why Is My Arlo Camera Blinking Orange?

Before we dive into the solutions, let’s first understand the possible causes behind the Arlo LED blinking orange:

  1. Depleted Batteries: One of the most common reasons for the Arlo camera blinking orange is exhausted batteries. If your camera’s batteries are running low or have been completely drained, you may experience a continuous flickering orange light.
  2. Internet Connectivity Issues: Even if your camera’s batteries are fine, a poor internet connection can cause the Arlo camera to blink orange. A stable and strong internet connection is crucial for the proper functioning of your Arlo camera.
  3. Improper Connections: Incorrectly connected wires can also lead to the blinking orange light issue. It’s essential to ensure that all the cables are properly connected to avoid any problems.
  4. Sync Errors: If the syncing process between your Arlo camera and the base station is not completed correctly, you may encounter the orange blinking light.

Blinking Orange on Arlo Camera:

Quick Tips Before we move on to more detailed solutions, here are some quick tips that may help resolve the Arlo camera blinking orange issue:

  1. Replace the Batteries: If your Arlo camera’s batteries are depleted, simply replacing them with new ones can often solve the problem. Here’s how:
    • Remove the camera from its mount or wall.
    • Press down on the battery compartment to open it.
    • Remove the old batteries from the battery straps.
    • Wait for 5-6 minutes before inserting new batteries.
    • Place the camera back in its compartment and test it.
  2. Charge Your Arlo Camera: If your Arlo camera is not properly charged, it may blink orange. Follow these steps to charge your camera:
    • Unmount the camera from the wall.
    • Remove the USB cover (if attached) from the bottom of the camera.
    • Connect both ends of the USB cable and allow sufficient charging time.
    • Test the camera after mounting it back on the wall.

Performing the Resyncing Process If the syncing process between your Arlo camera and the base station was not completed successfully, resyncing the device is the way to go.

Unstable internet connectivity or low network speeds can often cause sync issues.

Make sure you have a strong and stable network connection while performing the resync process.

Follow these steps to resync your Arlo camera:

Step Action
1 Press and hold the sync button on the Arlo base station for a few seconds. Be careful not to press it for too long, as it may cause the USB LED to flash amber, indicating a failed sync.
2 Wait for the green light to appear, signaling the start of the synchronization process.
3 Locate the sync button on your Arlo camera and press it for a few seconds.
4 Look for a blinking blue LED light on the camera, which confirms the sync process.
5 If you notice a blinking amber light instead, it means the sync process has failed, and you’ll need to repeat the steps.
6 Once you see a solid green light, you’ll know that the syncing process is complete and successful.

Resetting Your Arlo Camera If none of the above solutions work, resetting your Arlo camera can often resolve any internal glitches or issues.

Here’s how you can reset your Arlo camera:

  1. Open the Arlo app and go to the Settings menu.
  2. Select your camera from the My Devices list.
  3. Choose the Remove Device option and confirm by clicking Yes.
  4. To add your camera back, go to the My Devices section again.
  5. Select your camera and follow the on-screen instructions to complete the setup process.


  • Q: How long does it take to charge an Arlo camera?

A: The charging time for an Arlo camera may vary depending on the model and the battery’s current level. On average, it takes about 2-4 hours to fully charge an Arlo camera.

  • Q: Can I use third-party batteries in my Arlo camera?

A: While it’s possible to use third-party batteries, it’s always recommended to use official Arlo batteries to ensure optimal performance and compatibility.

  • Q: What should I do if the resync process fails?

A: If the resync process fails, try moving your Arlo camera closer to the base station and ensure that there are no obstructions or interference sources nearby. Then, repeat the resync steps.

  • Q: Will resetting my Arlo camera erase all my settings and recordings?

A: Yes, resetting your Arlo camera will erase all your custom settings and recordings. Make sure to back up any important footage before proceeding with the reset.

More Camera Related Guides:


Dealing with a blinking orange light on your Arlo camera can be a frustrating experience, but with the solutions and tips provided in this article, you should be able to resolve the issue and get your camera functioning properly again.

Whether it’s replacing the batteries, ensuring a stable internet connection, resyncing the device, or resetting the camera, these steps will help you troubleshoot and fix the Arlo camera blinking orange problem.

If you’ve tried all the solutions and still can’t resolve the issue, don’t hesitate to reach out to Arlo’s customer support for further assistance.

With your Arlo camera back in working order, you can continue to enjoy the peace of mind that comes with a reliable home security system.