Vizio TV Won’t Turn On

Vizio TV Won’t Turn On – Here is how you can simply Fix a Vizio TV Won’t Turn On, you just need to follow what we are going to share below:

Vizio TV Won’t Turn On

How to Fix Vizio TV Won’t Turn On Issue?

1. Power Cycle Your Vizio TV

• Now, when you turn your Vizio TV “off,” it isn’t truly off. In its place, it enters a low-powered “standby” mode that allows it to start up quickly.
• If something goes wrong, your TV can get stuck in standby mode, and to simply wake it up, you’ll have to perform a hard reboot of the TV.
• You simply need to unplug it from the wall outlet and wait for 30 seconds.
• This will give time for any residual power to drain from the TV and then plug it back in and try to turn it on again.

2. Replace the Batteries in Your Remote

• If power cycling didn’t work, the following potential culprit is your remote open the battery compartment and ensure that the batteries are fully seated.
• After that, simply try pressing the power button again and If nothing happens, you just need to replace the batteries, and try the power button once more.
• Expectantly, your TV will turn on.

3. Turn Your Vizio TV on Using the Power Button

• Vizio remotes are pretty strong and we still have the one for a TV I bought in 2012, and it still works.
• But even the most dependable remotes can break. When you walk up to your TV and press and hold the power button on the back or side.
• Then, it should simply power on in a couple of seconds and If it doesn’t, you’ll need to dig a bit deeper.

4. Check Your Vizio TV’s Cables

• The following thing you need to do is check your cables and simply Inspect both your HDMI cable and your power cable, and you need to make sure they’re in decent condition.
• You’ll need an innovative one if there are any horrendous kinks or missing insulation simply unplug the cables and plug them back in so you know they’re correctly inserted.
• You can also try substitution in a spare cable if that doesn’t fix your problem and The damage to your cable could be invisible.
• In that precise case, you’d only find out about it by using a different one.
• Numerous Vizio TV models come with a non-polarized power cord, which can malfunction in standard polarized outlets. Simply look at your plug prongs and see if they’re the same size.
• If they’re matching, you have a non-polarized cord and You can be able to order a polarized cord for around 10 dollars, and it should solve your issue.

5. Simply check Your Vizio TV’s Power Indicator Light

Even if your TV won’t turn on, your power button can provide insight into its status.

You simply need to press and hold the power button and watch the indicator light.

This can be the word “Vizio” meant out in LED lights or a simple LED light bar.

Now, when you hold the power button, you’ll see one of three patterns:

• The light blazes amber/orange and white.
• The light originates on dim, then turns bright.
• The light originates on bright white, then fades. 

6. Double Check Your Input Source

Another mutual mistake is using the wrong input source.

• Primary, you need to double-check where your device is plugged in.
• Then, you need to make note of which HDMI port it’s connected to (HDMI1, HDMI2, etc.) and Next press your remote’s Input button.
• Now, If the TV is on, it will switch input sources. Simply Set it to the correct source, and your problem will be solved.

7. Test Your Outlet

• You need to simply unplug your TV from the outlet, and plug in a device that you know is working.
• A cell phone charger is good for this connect your phone to the charger, and see if it draws any current and if it doesn’t, your outlet isn’t delivering any power.
• In maximum cases, outlets stop working because you’ve tripped a circuit breaker.
• Simply Check your breaker box, and see if any breakers have stumbled.
• If one has, reset it but keep in mind that circuit breakers trip for a motive. Maybe you’ve probably overloaded the circuit, so you might need to move some devices around.
• If the breaker is intact, there’s a graver problem with your home’s wiring.
• At this point, you should simply call an electrician and have them diagnose the problem.
• In the period in between, you can just use an extension cord to plug your TV into an occupied power outlet.

8. Factory Reset Your Vizio TV

• Occasionally, Vizio TVs glitch out and they work most of the time but need frequent power cycling to power on.
• If you find yourself power cycling your TV every few days, there’s perhaps a firmware issue.
• In this case, a factory reset will resolve your issues.
• Now, you need to wait for your TV screen may flicker during the reset. Ultimately, it will shut itself off and turn back on again.
• At that point, the TV will start the Setup App process and it will be as if you’ve just plugged in a brand-new TV.
• Some of Vizio’s SmartCast TVs also have a manual reset option and look on the back or the sides for the volume buttons.
• Then, you need to press and hold the volume down and input buttons concurrently.
• After ten or fifteen seconds, you’ll also get a confirmation message and to confirm, press and hold the input button until the TV resets.
• You need to simply note that your TV still needs to be powered on for the manual technique to work.

Also Check:

Conclusion:

We have shared everything about Fixing a Vizio TV Won’t Turn On in this article if the info that we shared above helped you in any way then do share it with others.