Whirlpool Accubake Oven Display Not Working – Whirlpool’s Accubake system includes an electronic oven control with a digital display that allows you to easily set cooking times, temperatures, and cooking functions.
However, like any appliance, issues can arise. A common problem with Whirlpool Accubake ovens is that the digital display stops working properly.
Whirlpool Accubake Oven Display Not Working – Fix It
There are a few steps you can take to try and get it functioning again before calling for service.
Understanding the Accubake System
Before jumping into troubleshooting, it helps to understand what the Accubake system is and how it works.
Accubake is a feature in some Whirlpool built-in ovens that uses a hidden lower oven element to provide consistent heat throughout the oven. This allows for even baking and browning without the need to rotate pans.
The Accubake system relies on an electronic oven control board to regulate temperature. The control board gets input from an electronic temperature sensor and adjusts power to the bake and broil elements accordingly.
It also powers the digital display where you select cooking modes and enter temperature/time settings.
Troubleshooting Steps to Fix Whirlpool Accubake Oven Display Not Working:
If your Whirlpool Accubake oven’s digital display is not working, here are some things you can try before calling a technician:
- Check Power Supply
The first step is verifying that the oven is getting power. Check the breaker or fuse box and ensure the circuit for the oven is not tripped or blown. Also, make sure the oven is fully plugged into the electrical outlet if it is a plug-in model.
- Reset Main Power
If the oven has power but the display still doesn’t work, try resetting the main power supply. This can be done by switching the circuit breaker for the oven to “off” for 10-15 seconds and then back to “on.” This may reset the control board and get the display working again.
- Check for Error Codes
Even though the display may appear dead, error codes may still be flashing. Check the digital display for any error codes consistently flashing. Consult your owner’s manual or the chart on the back of the oven door to determine what the error code means. This can provide a starting point for troubleshooting.
- Replace Fuse
Accubake ovens have a small fuse located either on the back of the control panel or inside the unit. Check this fuse and replace it if blown. Always use a fuse of the same size, type, and amperage listed on the fuse holder itself.
- Reset Control Board
If the display is still not operational, try resetting the oven’s computerized control board. To do this, simply unplug the oven or switch the circuit breaker off for at least one minute. This may reset the control board and get the display working again when power is restored.
- Check Ribbon Cable and Wiring
A loose ribbon cable or other disconnected wiring between the control board and the display can cause issues. Take the back panel off the oven to access internal components. Make sure the ribbon cable connecting the display is firmly plugged into the control board. Also, check any other wire connectors related to the display and control board.
- Bypass Oven Door Switch
There is a door switch that disables the oven when the door is open. If this is faulty, it may prevent the display from turning on. Bypass this switch by unplugging the oven and removing the switch connector from the control board. Then plug the oven back in. If the display now works, the oven door switch is likely defective.
- Replace Control Board
If none of these steps restore the functionality of the digital display, the most likely culprit is a failed control board. Electronic oven control boards often cannot be repaired and need a full replacement. Locate the part number for your specific model’s control board and order a new one online or through an appliance parts supplier. Then follow the instructions to remove and replace the control board.
Troubleshooting Whirlpool Accubake Error Codes
If you see an error code flashing on your Whirlpool Accubake oven display, determining the meaning can help resolve the issue. Here are some of the most common Accubake error codes and what they signify:
- F1 – This indicates a stuck key on the control panel. Try pressing all keys to free a stuck one. If the problem persists, replace the control board.
- F3 – The oven sensor is not providing proper temperature readings. Check that the sensor probe is fully inserted. Replace the sensor if required.
- F5 – A short oven sensor. Inspect sensor wiring for damage. Replace the sensor if the wire insulation is compromised.
- F6 – Faulty communication between control and sensor. This may indicate defective wiring or a need for control board replacement.
- F7 – Oven not heating properly. Check the bake element, and replace it if it is non-functional. Ensure element connectors are secure.
- F9 – Oven not heating to set temperature. Indicates failed relay on control board, which will need replacing.
- F10 – Runaway temperature – Oven continuing to heat despite controls off. Points to faulty relay or control board.
Preventing Future Accubake Display Problems
To help avoid Accubake display issues in the future, here are some tips:
- Keep your oven interior clean – Built-up grease and food debris can lead to oven component problems.
- Use oven liners – This protects the oven bottom from spills that can get into interior parts.
- Have oven serviced regularly – Preventative maintenance helps spot minor issues before they become major.
- Use surge protector – Protect the control board from power surges that can sort it out.
- Don’t use an oven as storage space – Too many stored items can strain the oven and its parts.
- Check for rodent damage – Chewed wires are a common cause of oven malfunctions.
With proper maintenance and care, your Whirlpool Accubake oven’s electronic display should provide reliable performance. But even quality appliances can eventually develop issues.
Following these troubleshooting tips when the display stops working can often get your oven baking again without the need for expensive repairs.
Also Check:
Conclusion:
Whirlpool Accubake ovens are designed to provide reliable, even baking results thanks to the built-in Accubake technology. However, like any appliance, problems can occur.
When the digital display on your Accubake oven stops working, there are several DIY troubleshooting steps you can take to get it functioning again before calling a repair service.
Resetting power, checking for error codes, replacing fuses, and inspecting connections and wires are all things you can do yourself to resolve a blank display issue. In most cases, the problem ends up being something simple like a faulty door switch or a blown fuse.
But if a control board failure is the culprit, don’t hesitate to replace it yourself to get your Accubake oven lighting up again.
With the right information and a few basic tools, you can often diagnose and fix an unresponsive Whirlpool Accubake oven display at home and avoid the hassle and cost of professional repair.
